This is default featured slide 1 title
This is default featured slide 2 title
This is default featured slide 3 title
This is default featured slide 4 title
This is default featured slide 5 title
 

Why No One Talks About Tips Anymore

RC Helicopter Pre-Flight and Post Flight Checklist Which You Need to Know If it is your first time to try it to fly even if you have the best RC helicopter you have to remember a few important things. There should always be a pre-flight and post flight checklist you need to follow in order that your RC helicopter flies smoothly and lands safely as well like every other real plane. Every time you fly a helicopter, before you take it up and after you’re done flying you may want to check all of these things first. Little things like these will guarantee that you don’t have a day of just buying parts and you will have a lot of good enjoyable hours on your helicopter. Turn the radio on first then you plug in the helicopter is the most important thing is to make sure that before you fly you. Don’t forget to turn on the helicopters first and then the radios which the little receiver goes into a standby mode and doesn’t link to the radio which everyone thinks they got a bad helicopter. Remember is to turn on the remote first and you won’t have all of those problems then you’re all set. When plugging in the helicopter it has a jar on board which you have to remember. You need to make sure that as soon as you plug it in set it down on a flat surface and let it be still. Wait first for it to show the lights pop on. When you try to move it around after you have just plugged the gyro on it wouldn’t know what ‘still’ is. It should know what it means to be still by setting it down after you plugged it in. It will fly extremely and radically if you move it thinking it is what you mean of being ‘still’. It wouldn’t fly at all after. Obviously, you want to fly it with a fully charged battery. If you somehow crashed it on your first flight, here is a side checklist you need to do. On top of the main helicopter blades called the Y bar should be freely moving. It should be bouncing back and forth so you know it is not binding when you try to hit it with your fingers. It should be able to move as freely as possible because this is what keeps your helicopter stable which is very important. If the Y bar is tight, lockdown or binding that means your helicopter is going to fly very radically.
A Simple Plan: Resources
For post flight things to remember, you have to unplug the helicopter. The radio must be turned off. Keep them safe in a room temperature free from moist and sun exposure. Make sure to recharge the batteries for both remote control and the helicopter.
Learning The “Secrets” of Resources
These checklists will make sure that you will enjoy your RC helicopter for a very long time.